Yazar "Kabalcı, Ersan" için Elektrik-Elektronik Mühendisliği Bölümü Koleksiyonu listeleme

Yazar "Kabalcı, Ersan" için Elektrik-Elektronik Mühendisliği Bölümü Koleksiyonu listeleme

Sırala: Sıra: Sonuçlar:

  • Kabalcı, Ersan; Kabalcı, Yasin (Academic Press, 2021)
    The power systems comprise centralized and distributed generation sources, building the generation stage. The generators actuated by any of the power sources convert any type of energy to electrical power and are described ...
  • Kabalcı, Ersan; Boyar, Aydın; Kabalcı, Yasin (Academic Press, 2021)
    The power generation has been centralized for many years. The conventional power network comprises large hydropower plants (HPPs), thermoelectric power plants, and nuclear power plants. This chapter deals with the central ...
  • Kabalcı, Ersan; Gautam, M. K.; Pati, A; Mishra, S.K.; Appasani, Bhargav; Bizon, Nicu (Sustainability, 2021)
    Networked control systems (NCSs) are attracting the attention of control system engineers. The NCS has created a paradigm shift in control system technology. An NCS consists of control loops joined through communication ...
  • Kabalcı, Yasin; Kockanat, Serdar; Kabalcı, Ersan (IEEE, 2017-12-07)
    This paper presents an optimization approach based differential search algorithm (DSA) for amplitude and phase estimation of time varying power signal in electrical power systems. Proposed method has been tested for two ...
  • Kabalcı, Ersan; Kabalcı, Yasin (IEEE, 2017-02-23)
    The most important parts of the smart meters are the sensing devices that are utilized to measure for both current and voltage magnitudes of the systems. Therefore, several investigations have to be carried out to improve ...
  • Kabalcı, Yasin; Kockanat, Serdar; Kabalcı, Ersan (Elsevier, 2018-01-01)
    Electrical harmonic is an important issue on power quality of electrical systems. Therefore, estimation of power harmonics are essential to design filters to be utilized in electrical power systems for reducing harmonics ...
  • Al-Chlaihawi, Sarab; Valtchev, Stanimir; Kabalcı, Ersan (IEEE 2020 2nd Global Power, Energy and Communication Conference (GPECOM), 2020-11-09)
    This study introduces an efficient method to determine the computation mathematical formula of mutual inductance (M) for a pair of ring coils. A design technique called Box-Behnken that based on the response surface ...
  • Kabalcı, Ersan (Elsevier, 2015-01-15)
    The automatic meter reading is essentially required in renewable grids as in conventional grids. It is intended to propose a reliable measurement system that is validated in a photovoltaic power system to meet the requirement ...
  • Colak, İlhami; Kabalcı, Ersan; Fulli, Gianluca; LAzarou, Stavros (Elsevier, 2015-07)
    The smart grid (SG) as a research area is advancing dealing with a wider range of topics such as power systems, energy generation and telecommunication. The conventional utility grid is used to operate in a passive mode ...
  • Kabalcı, Ersan; Kabalcı, Yasin (International Journal of Electrical Power & Energy Systems, 2018-03)
    The design and implementation studies of a real time monitoring and smart metering system are presented in this study. The proposed design is improved in terms of smart metering infrastructure based on current, voltage, ...
  • Kabalcı, Ersan; Boyar, Aydın (IEEE, 2020-11-09)
    The photovoltaic (PV) power conversion is one of the most extensively studies research areas among renewable energy sources. The inverters that are indispensable in terms of power conversion process have also been improved ...
  • Kabalcı, Ersan (Energy, 2018-06-15)
    This study introduces integration of wind plants, solar panels, and fuel cell plants to comprise a hybrid microgrid (MG). The energy conversion process of wind plant and fuel cell is managed by a conventional PI controller ...
  • Kabalcı, Ersan; Kabalcı, Yasin; Boyar, Aydın (Academic Press, 2021-03-01)
    The controllers improved for commutating multilevel inverters (MLIs) are based on fundamental modulators fed by required parameters obtained from feedback or feedforward devices. This chapter presents a general introduction ...
  • Kabalcı, Ersan; Boyar, Aydin (Academic Press, 2021-03-01)
    Electric vehicles (EVs), both hybrid EVs (HEVs) and plug-in EVs (PEVs), have been widely researched and studied. The PEVs have an all-electric system, while the HEVs are based on joint operation of an internal combustion ...
  • Kabalcı, Ersan; Neves Duarte, Samuel; Gomes Barbosaa, Pedro (Academic Press, 2021-03-01)
    The static synchronous compensator (STATCOM) is a power electronic converter designed to be shunt-connected with the grid to compensate for reactive power. Although they were originally proposed to increase the stability ...
  • Kabalcı, Ersan (Academic Press, 2021-03-01)
    The widespread use of distributed generation, integration of renewable energy sources, energy storage systems, and electric vehicles has increased the need for the coupling of different types of sources and loads in a ...
  • Padmanaban, Sanjeevikumar; Kabalcı, Ersan; Iqbal, Atif; Abu-Rub, Haitham; Olorunfemi, ojo (Elsevier, 2015-06)
    For high-voltage (HV) applications, the designers mostly prefer the classical DC–DC boost converter. However, it lacks due to the limitation of the output voltage by the gain transfer ratio, decreased efficiency and its ...
  • Kabalcı, Ersan (Springer Nature, 2014-12-02)
    This chapter reviews different converter topologies and output filter configurations used in STATCOM applications. The output voltage and harmonic control of a STATCOM is obtained by individual control of each switch in ...
  • Kabalcı, Ersan; Boyar, Aydın; Metin, Nuri Alper (IEEE, 2019-07-29)
    Fossil-based energy sources cause air pollution, climate change and also it is known that fossil energy sources are not sustainable. Therefore, researchers focus on investigation of alternative energy sources for ...
  • Kabalcı, Ersan (Elsevier, 2013-08-01)
    A hybrid renewable energy plant that is based on solar and wind energy conversion systems is designed and analysed in this paper. Each separate energy conversion system is controlled either using regular PI controller or ...