DSpace@NEVÜ
→
Yazara göre listeleme

Yazar "Tüzemen, Mehmet Çağrı" için listeleme

Toplam kayıt 12, listelenen: 1-12

Additive manufacturing design approach to strut-based functionally graded porous structures for personalized implants

Tüzemen, Mehmet Çağrı; Salamcı, Elmas; Ünal, Rahmi (Elseiver, 2022-12)

This study aims to create mathematical models (MMs) and maps that will facilitate personalized implant design and provide the selection of design parameters that give desired mechanical and physical properties. For this ...
Bütünleşik SWARA-MULTIMOORA yaklaşımı ile uçak gövdesi için malzeme seçimi

Çalış Boyacı, Aslı; Tüzemen, Mehmet Çağrı (DergiPark, 2020)

Saf elementlerin yanında alaşımlama, ısıl işlem gibi ardıl işlemler ve kompozit malzeme üretimi ile mühendislik malzemelerinin çeşidi her geçen gün daha da artmaktadır. Böylesine geniş bir malzeme havuzundan, üretilecek ...
Design and analysis of lightweight automotive component for turbocharger units

Tüzemen, Mehmet Çağrı; Ağaoğlu, Mehmet; Karakaya, Mehmet; Salamcı, Elmas; Küçüktürk, Gökhan (Horizon Research Publishing (HRPUB), 2015)

Nowadays global warming in parallel with air pollution is a significant problem. One of the major causes is the conventional fuel-powered automobile. This study focuses on reducing global warming caused by automobiles. ...
Effect of microstructure on mechanical properties and abrasive wear behavior of low carbon dual-phase steels

Tüzemen, Mehmet Çağrı; Elmas, Salamcı (American Society of Mechanical Engineers, 2014-07-25)

The mechanical properties and wear behavior of Dual Phase (DP) steels have been investigated and compared with those observed in normalized (N) steel that has the same chemical composition. The DP steels having different ...
Enhancing mechanical properties of bolted carbon/epoxy nanocomposites with carbon nanotube, nanoclay, and hybrid loading

Tüzemen, Mehmet Çağrı; Salamcı, Elmas; Avcı, Ahmet (Elseiver, 2017-11-01)

The effects of adding nanoclay (NC), carbon nanotube (CNT), and a hybrid of both on bending, tensile and bearing strengths of nanocomposite plates were investigated in this study. Sonication method was used to ensure ...
Investigation of compatibility between design and additively manufactured parts of functionally graded porous structures

Dursun, Ahmet Murat; Tüzemen, Mehmet Çağrı; Salamcı, Elmas; Yılmaz, Oğuzhan; Ünal, Rahmi (2022)

In this study, deviations for the porosity level of the Ti-6Al-4V functionally graded porous structures for three different cell structures were investigated. For this purpose, functionally graded porous structures are ...
Investigation of tensile properties of glass fiber/ nanocomposites laminates enhanced with graphene nanoparticles

Tüzemen, Mehmet Çağrı; Khakzad, Farnoud; Salamcı, Elmas (The Korean Fiber Society, 2021-03-27)

In this study, mechanical properties of graphene nanoparticles (GNP) added glass fiber/epoxy nanocomposite specimens and the effect of GNP were investigated by applying the tensile test. Specimens were produced by vacuum ...
Investigation of the relationship between flexural modulus of elasticity and functionally graded porous structures manufactured by AM

Tüzemen, Mehmet Çağrı; Salamcı, Elmas; Ünal, Rahmi (Elsevier, 2022-04-25)

There is an increased interest to produce open porous metallic lattice structures with regular unit cell architectures by additive manufacturing processes, which were impossible or difficult to manufacture using conventional ...
Karbon fiber/epoksi nanokompozit plakalarda nanopartikül katkısının fiber, matris ve boşluk hacim oranlarına etkisi

Tüzemen, Mehmet Çağrı; Salamcı, Elmas; Avcı, Ahmet (DergiPark, 2017)

Bu çalışmada farklı oranlardaki nanopartikül takviyesinin fiber, matris ve boşluk hacim oranlarına etkisi incelenmiştir. Karbon fiber/epoksi nanokompozit plakalar vakum infüzyon yöntemi (VİY) ile üretilmiştir. Üretim ...
Multi-criteria decision-making approaches for aircraft-material selection problem

Çalış Boyacı, Aslı; Tüzemen, Mehmet Çağrı (Inderscience Publishers (IEL), 2022)

This paper is related to the use of multi-criteria decision-making (MCDM) tools for assisting material selection for aircraft parts. In this direction, decision models including analytic hierarchy process (AHP), complex ...
The effects on the flexural strength and impact behavior of nanographene ratio of the glass fiber nanocomposite plates

Khakzad, Farnoud; Tüzemen, Mehmet Çağrı; Salamcı, Elmas; Anıl, Özgür (John Wiley & Sons, Inc., 2019-09-02)

In this study, the flexural strength and the impact behavior of the glass fiber composite plates with the same mesh and layer geometry and the effect of the addition of nanographene (GNP) at various ratios into the matrix ...
Yalın, katmanlar arası ve katman içi açılı cam/karbon karma kompozitlerin çekme yükü altındaki davranışları

Tüzemen, Mehmet Çağrı (Bilgin Kültür Sanat, 2022)