DSpace@NEVÜ
→
Yazara göre listeleme

Yazar "42502" için listeleme

Toplam kayıt 6, listelenen: 1-6

Characteristics of lightweight diatomite‑based insulating firebricks

Dal, Serkan; Sütçü, Mücahit; Gök, Mustafa Sabri; Gencel, Osman (Springer, 2020)

This study covers the physical, thermal, mechanical, and microstructural properties of porous ceramic materials produced from mixtures containing refractory clay and diatomite in different proportions. The raw materials ...
Characterization of industrial ceramic glazes containing chromite processing waste: Experimental factorial design effects on color parameters

Bayer Öztürk, Zahide; Dal, Serkan (Materials Chemistry and Physics, 2022-04-15)

A new ceramic pigment material was obtained by the waste of processing chrome ore from the deposits of Pınarbas ̧ı Village (Kayseri/Turkey) for industrial glaze application. The chemical analysis of waste powder was performed ...
Farklı oranlarda si içeren TRIP çeliğinin Mig-Mag kaynak tekniği ile kaynağı ve mikroyapısının incelenmesi

Dal, Serkan; Çarboğa, Cemal; Kurt, Bülent (Nevşehir Hacı Bektaş Veli Üniversitesi, 2017-12-30)

Bu çalışmada, tipik TRIP (Transformation Induced Plasticity) çeliğinin mevcut silisyum miktarı değiştirilerek vakumsuz indüksiyon ocağında farklı Si içeriğine sahip TRIP çeliği üretimi gerçekleştirilmiştir. Tipik TRIP ...
Hafif mineral katkılı killi-seramik malzemelerin mikroyapı ve fiziksel özellikleri

Dal, Serkan; Sütçü, Mücahit; Gök, Mustafa Sabri; Gencel, Osman (219)

Low density ceramic structures have an important place in application areas such as heat, noise and noise insulation. Besides, being durable and inexpensive is also a demand for producers and consumers. In this study, ...
Microstructure, hardness and high temperature wear characteristics of boronized Monel 400

Küçük, Yılmaz; Döleker, Kadir Mert; Gök, Mustafa Sabri; Dal, Serkan; Altınay, Yasemin; Erdoğan, Azmi (Elsevier, 2022-04-25)

Boronizing processes were carried out at 900 ◦C, 950 ◦C and 1000 ◦C for 2, 4 and 6 h to improve the wear performance of Monel 400 alloy. According to microstructure analyses and nanoindentation tests, Ni2B, FeNiB and FeB ...
The effects of homogenization time on the crystal structure and hardness of NiMnGaMo alloy

Dal, Serkan; Demirel, Bilal; Eskil, Murat (Elsevier, 2021-05-05)

This study is based on X-ray diffraction (XRD) and DSC analysis, Scanning Electron Microscopy (SEM) and Optical Microscope observations and Vickers Micro Hardness Test results with structural effect and phase transformations ...