• Additive manufacturing design approach to strut-based functionally graded porous structures for personalized implants 

  Tüzemen, Mehmet Çağrı; Salamcı, Elmas; Ünal, Rahmi (Elseiver, 2022-12)

  This study aims to create mathematical models (MMs) and maps that will facilitate personalized implant design and provide the selection of design parameters that give desired mechanical and physical properties. For this ...
• Design and analysis of lightweight automotive component for turbocharger units 

  Tüzemen, Mehmet Çağrı; Ağaoğlu, Mehmet; Karakaya, Mehmet; Salamcı, Elmas; Küçüktürk, Gökhan (Horizon Research Publishing (HRPUB), 2015)

  Nowadays global warming in parallel with air pollution is a significant problem. One of the major causes is the conventional fuel-powered automobile. This study focuses on reducing global warming caused by automobiles. ...
• Effect of microstructure on mechanical properties and abrasive wear behavior of low carbon dual-phase steels 

  Tüzemen, Mehmet Çağrı; Elmas, Salamcı (American Society of Mechanical Engineers, 2014-07-25)

  The mechanical properties and wear behavior of Dual Phase (DP) steels have been investigated and compared with those observed in normalized (N) steel that has the same chemical composition. The DP steels having different ...
• Yalın, katmanlar arası ve katman içi açılı cam/karbon karma kompozitlerin çekme yükü altındaki davranışları 

  Tüzemen, Mehmet Çağrı (Bilgin Kültür Sanat, 2022)
• Pro-angiogenic thermosensitive injectable hydrogels for bone regeneration 

  Kocak, Fatma Zehra; Yar, Muhammad; Rehman, Ihtesham Ur (TERMIS, 2018-09-05)

  Hydrogels being similar to extracellular matrix (ECM) of tissues have very attractive features mitigating surgical treatments, and improving sustainable delivery of drugs and growth factors. Thermosensitive polymer ...
• Hydroxyapatite-ıntegrated, heparin- and glycerol-functionalized chitosan-based injectable hydrogels with ımproved mechanical and proangiogenic performance 

  Koçak, Fatma Zehra; Yar, Muhammad; Rehman, Ihtesham Ur (MDPI, 2022-05-11)

  The investigation of natural bioactive injectable composites to induce angiogenesis during bone regeneration has been a part of recent minimally invasive regenerative medicine strategies. Our previous study involved the ...
• Minimally invasive thermosensitive hydrogels to promote angiogenesis for bone regeneration and drug delivery 

  Kocak, Fatma Zehra; Yar, Muhammad; Rehman, Ihtesham Ur (2019-12-12)

  OBJECTIVES The lack of sufficient blood supply to tissues due to the insufficient vascularity, the ultimate bone healing remains very challenging. Current clinical treatments often cause further blood loss due to multiple ...
• Investigation of different synthesis parameters of hydroxyapatite for tissue engineering applications 

  Kocak, Fatma Zehra; Yar, Muhammad; Rehman, Ihtesham Ur (ISPBS, 2022-07-10)

  Hydroxyapatite undoubtedly has vital roles in tissue engineering applications. The fabrication methods and different treatments lead distinct properties in hydroxyapatite crystals, including particle, size, shape, and ...
• Kemik Onarımı ve Yenilenmesinde Hidroksiapatitin Kullanımı 

  Daldiken, Esma; Kocak*, Fatma Zehra (ISAS, 2022-05-28)

  Although some of the small damages in bone tissues can recover due to self-regeneration, this becomes challenging in large damages. When bone is insufficient to regenerate itself, different treatment methods are applied. ...
• Bone angiogenesis via bioactive thermosensitive injectable hydrogels 

  Kocak, Fatma Zehra; Yar, Muhammad; Rehman, Ihtesham Ur (wbc, 2020-12-15)

  Special Symposium - Biomaterials for tissue engineering applications- Oral ONLY Symposium: Vascularisation Strategies in Tissue Engineering Introduction: Bone treatment methods comprising transplantation techniques and ...
• Characterization of industrial ceramic glazes containing chromite processing waste: Experimental factorial design effects on color parameters 

  Bayer Öztürk, Zahide; Dal, Serkan (Materials Chemistry and Physics, 2022-04-15)

  A new ceramic pigment material was obtained by the waste of processing chrome ore from the deposits of Pınarbas ̧ı Village (Kayseri/Turkey) for industrial glaze application. The chemical analysis of waste powder was performed ...
• Microstructure, hardness and high temperature wear characteristics of boronized Monel 400 

  Küçük, Yılmaz; Döleker, Kadir Mert; Gök, Mustafa Sabri; Dal, Serkan; Altınay, Yasemin; Erdoğan, Azmi (Elsevier, 2022-04-25)

  Boronizing processes were carried out at 900 ◦C, 950 ◦C and 1000 ◦C for 2, 4 and 6 h to improve the wear performance of Monel 400 alloy. According to microstructure analyses and nanoindentation tests, Ni2B, FeNiB and FeB ...
• Characterization of industrial ceramic glazes containing chromite processing waste: Experimental factorial design effects on color parameters 

  Bayer Öztürk, Zahide; Dal, Serkan (Materials Chemisrty and physics, 2022-04-15)

  A new ceramic pigment material was obtained by the waste of processing chrome ore from the deposits of Pınarbaşı Village (Kayseri/Turkey) for industrial glaze application. The chemical analysis of waste powder was performed ...
• Mechanical and microstructural characteristics of geopolymer mortars at high temperatures produced with ceramic sanitaryware waste 

  Bayer Öztürk, Zahide; Atabey, İsmail İsa (Elsevier, 2022-05-01)

  Excessive amounts of solid wastes are generated by the ceramic sanitaryware sector in the world. Recycling ceramic wastes is one of the crucial solutions to ensure their elimination. This experimental study investigates ...
• Investigation of the relationship between flexural modulus of elasticity and functionally graded porous structures manufactured by AM 

  Tüzemen, Mehmet Çağrı; Salamcı, Elmas; Ünal, Rahmi (Elsevier, 2022-04-25)

  There is an increased interest to produce open porous metallic lattice structures with regular unit cell architectures by additive manufacturing processes, which were impossible or difficult to manufacture using conventional ...
• Multi-criteria decision-making approaches for aircraft-material selection problem 

  Çalış Boyacı, Aslı; Tüzemen, Mehmet Çağrı (Inderscience Publishers (IEL), 2022)

  This paper is related to the use of multi-criteria decision-making (MCDM) tools for assisting material selection for aircraft parts. In this direction, decision models including analytic hierarchy process (AHP), complex ...
• Investigation of compatibility between design and additively manufactured parts of functionally graded porous structures 

  Dursun, Ahmet Murat; Tüzemen, Mehmet Çağrı; Salamcı, Elmas; Yılmaz, Oğuzhan; Ünal, Rahmi (2022)

  In this study, deviations for the porosity level of the Ti-6Al-4V functionally graded porous structures for three different cell structures were investigated. For this purpose, functionally graded porous structures are ...
• Hafif mineral katkılı killi-seramik malzemelerin mikroyapı ve fiziksel özellikleri 

  Dal, Serkan; Sütçü, Mücahit; Gök, Mustafa Sabri; Gencel, Osman (219)

  Low density ceramic structures have an important place in application areas such as heat, noise and noise insulation. Besides, being durable and inexpensive is also a demand for producers and consumers. In this study, ...
• Characteristics of lightweight diatomite‑based insulating firebricks 

  Dal, Serkan; Sütçü, Mücahit; Gök, Mustafa Sabri; Gencel, Osman (Springer, 2020)

  This study covers the physical, thermal, mechanical, and microstructural properties of porous ceramic materials produced from mixtures containing refractory clay and diatomite in different proportions. The raw materials ...
• Investigation of tensile properties of glass fiber/ nanocomposites laminates enhanced with graphene nanoparticles 

  Tüzemen, Mehmet Çağrı; Khakzad, Farnoud; Salamcı, Elmas (The Korean Fiber Society, 2021-03-27)

  In this study, mechanical properties of graphene nanoparticles (GNP) added glass fiber/epoxy nanocomposite specimens and the effect of GNP were investigated by applying the tensile test. Specimens were produced by vacuum ...

View more