DSpace@NEVÜ
→
Konuya göre listeleme

Konu "Mechanical properties" için listeleme

Toplam kayıt 11, listelenen: 1-11

AISI 4140 çeliğinin çeşitli çift fazlı mikroyapılarında mekanik özellikleri ile sürtünme davranışı ilişkisinin incelenmesi

Taşdelen, Mehmet; Yeşilyurt, Hasan (Nevşehir Hacı Bektaş Veli Üniversitesi, 2015-07-28)

Çift fazlı çelikler otomotiv sektöründe ihtiyaç duyulan hafif ve dayanıklı malzeme ihtiyacını gidermek amacıyla ilk olarak 1970’li yıllarda geliştirilmişlerdir. Bu tür çelikler ferrit fazı içerisinde dağılmış halde yer ...
Effect of microstructure on mechanical properties and abrasive wear behavior of low carbon dual-phase steels

Tüzemen, Mehmet Çağrı; Elmas, Salamcı (American Society of Mechanical Engineers, 2014-07-25)

The mechanical properties and wear behavior of Dual Phase (DP) steels have been investigated and compared with those observed in normalized (N) steel that has the same chemical composition. The DP steels having different ...
Enhancing mechanical properties of bolted carbon/epoxy nanocomposites with carbon nanotube, nanoclay, and hybrid loading

Tüzemen, Mehmet Çağrı; Salamcı, Elmas; Avcı, Ahmet (Elseiver, 2017-11-01)

The effects of adding nanoclay (NC), carbon nanotube (CNT), and a hybrid of both on bending, tensile and bearing strengths of nanocomposite plates were investigated in this study. Sonication method was used to ensure ...
Influence of calcined diatomite content and elevated temperatures on the properties of high strength mortars produced with basalt sand

Sarıdemir, Mustafa (WILEY‐VCH Verlag GmbH & Co. KGaA, 2020-06-08)

In this paper, the effect of calcined diatomite (CDT) content on the mechanical, microstructural, and mineralogical properties of high strength mortars (HSMs) exposed to 25, 400, 600, 800, and 1,000°C temperatures is ...
Investigation of tensile properties of glass fiber/ nanocomposites laminates enhanced with graphene nanoparticles

Tüzemen, Mehmet Çağrı; Khakzad, Farnoud; Salamcı, Elmas (The Korean Fiber Society, 2021-03-27)

In this study, mechanical properties of graphene nanoparticles (GNP) added glass fiber/epoxy nanocomposite specimens and the effect of GNP were investigated by applying the tensile test. Specimens were produced by vacuum ...
LM6 Alüminyum Alaşımlarında Zr’nin Etkisi

Tunçay, Tansel (Nevşehir Hacı Bektaş Veli Üniversitesi, 2019-01)

Bu çalışmada, konvansiyonel döküm yöntemiyle üretilen ve alaşımların mikroyapı ve mekanik özellikleri üzerine farklı miktarlarda Zr (% 0,05 ve 0,15) içeren LM6 alaşımları üzerindeki Zr miktarının etkisi incelenmiştir. Ek ...
Mechanical and microstructural characteristics of geopolymer mortars at high temperatures produced with ceramic sanitaryware waste

Bayer Öztürk, Zahide; Atabey, İsmail İsa (Elsevier, 2022-05-01)

Excessive amounts of solid wastes are generated by the ceramic sanitaryware sector in the world. Recycling ceramic wastes is one of the crucial solutions to ensure their elimination. This experimental study investigates ...
Mechanical and microstructural properties of alkali-activated lightweight mortars exposed to high temperatures

Sarıdemir, Mustafa; Çelikten, Serhat; Ayaydın, Günay (Elsevier, 2021-07-31)

The influence of the curing conditions (ambient curing or heat-curing), and concentration of the activating agent (8, 10, 12, 14, 16, 18 and 20 Molar sodium hydroxide solution) on the properties of alkali-activated lightweight ...
Properties of geopolymer mortars derived from ground calcined perlite and NaOH solution

Çelikten, Serhat; Işıkdağ, Burak (Taylor & Francis, 2021-01-27)

This study presents the strength development and characterisation of geopolymer mortars containing finely ground calcined perlite (GCP) as a precursor which is activated with sodium hydroxide (NaOH) solution. For this ...
SAC105 kurşunsuz lehim alaşımına eser miktarda antimon (Sb) ilavesi yapılarak termal, elektriksel, mekanik ve mikroyapısal özelliklerinin incelenmesi.

Öcal, Fadimana; Aksöz, Sezen (Nevşehir Hacı Bektaş Veli Üniversitesi, 2021-01-01)

Sn-1 ağ. % Ag-0.5 ağ. % Cu, Sn-1 ağ. % Ag-0.5 ağ. %Cu-0.5 ağ. % Sb, Sn-1 ağ. % Ag-0.5 ağ. % Cu-1 ağ. % Sb, Sn-1 ağ. % Ag-0.5 ağ. % Cu-1.5 ağ. % Sb, kurşunsuz lehim alaşımlarının ısıl iletkenliklerinin sıcaklığa bağlı ...
The effects on the flexural strength and impact behavior of nanographene ratio of the glass fiber nanocomposite plates

Khakzad, Farnoud; Tüzemen, Mehmet Çağrı; Salamcı, Elmas; Anıl, Özgür (John Wiley & Sons, Inc., 2019-09-02)

In this study, the flexural strength and the impact behavior of the glass fiber composite plates with the same mesh and layer geometry and the effect of the addition of nanographene (GNP) at various ratios into the matrix ...